BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller

BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller
BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller
BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller
BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller
BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller
BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller

BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller
BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump w/ Smart Controller for Tankless Water Supply Pressurization. Item Weight: 20.4 pounds. Package Dimensions: 23 x 9 x 7 inches. Date First Available: June 18, 2016.

PARAMETERS - 110V/60Hz; 0.6HP; 1 IN/OUT; Provides a max. Pressure of 4Bar and max. Flow of 15.9GPM; Suction 23ft.

FOR TANKLESS SYSTEM - SAY NO TO PRESSURE TANK, directly installed in home water supply pipeline. It cycles on and off as water is used and the pressure drops. It does make a little noise, but most of the time it just stays quietly in the corner. FEATURES - Real-time monitoring of water, automatically stop working if the inlet pipe is lack of water; Built-in check valve helps keep the pressure, prevent system from rapid starting and cycling. FOOD GRADE STANDARD - All of the components in contact with the pumped liquid are constructed from stainless steel 304, ensures complete hygiene and maximum resistance against corrosion.

Say NO to pressure tank and mechanical pressure switch. The controller monitor the water flow and pressure in the pipeline, and automatically start or stop the pump according to the changes in your water supply system. It also has safety measures to prevent the pump from running dry, backflow or overheating.

Safety comes first, all components are non-toxic, harmless and do not release any harmful gases. Smart Control, Easier Life The controller monitor the water flow and pressure in the pipeline, and automatically start or stop the pump according to the changes in your water supply system. When the kitchen faucet is turned off, the controller will continuously monitor the water pressure for 6 seconds and then stop the pump, to prevent the pump from cycle working in short time.

Restart if pressure drops below 1.5Bar/21psi; Stop working after turning off the tap Real-time monitoring of water flow to prevent the pump from running dry Built- in check valve & motor thermal protector Self-priming 0.6HP stainless steel shallow well pump with 10ft cord Max. Flow rate: 700 gallons per hour; Provides pressure up to max 58psi 1 Npt discharge & inlet with a swivel connector; Quick and easy installation A pressure regulator is necessary if the source pressure exceeds 25 PSI Read more Why your 0.6HP pumps have the same performance like other 1.6HP pumps?

In most cases, the greater the power, the stronger the performance. So some sellers will deliberately exaggerate these parameter, in order to obtain better competitiveness. Some sellers describe their products as 1.6HP, actually it may be less than 1HP. Why do your pumps have half the energy consumption than others as both of your pumps' flow rate are 900GPH. Our pumps' motor are more efficient.

It's flow rate is 900GPH, which is as strong as the old typed 1.6HP pump. High efficiency does not only bring low energy consumption, but also reduces heat generation to extend service life and reduce noise. Can I install the pump by myself?

Do I need a professional to maintain or repair it? Installation and maintenance is very simple.

We have already prepared the necessary accessories for your installation. The basic model has only one remoable handle (in the accessory bag), the mechanical switch and pressure gauge of the A model, and the automatic electronic switch of the B model are also easy to install and remove. In addition to motor or impeller damage, other conventional damage can be resolved by replacing the parts yourself. Why can't my pump pump any water? The flow is not steady?

For the first time, it is recommended to fill the pump head with water. Otherwise it will affect the suction.

If you have done, please check if the bottom valve leaks. If the flow is very small, may caused by the insufficient water supply.

Please check the water level of your well and extend the water pipe if necessary. Jet Pump - 4Bar +Pressure switch +Pressure & Flow switch Irrigation Pump - 2000GPH Rated Flow 12.2gpm 12.3gpm 12.3gpm 25.3gpm Rated Head 39.3ft 42.7ft 40.7ft 29.4ft Max.

Flow 15.9gpm 15.9gpm 15.9gpm 32.7gpm Max. Head 131ft 131ft 131ft 98ft Setting Restart if P20psi; Stop if F0.4GPM Restart if pressure drops to 21psi; Stop working after turning off the tap Caliber 1"In-1"Out 1"In-1"Out 1"In-1"Out 1 1/4"In-1"Out Weight 16.3Ibs 18.7Ibs 20.7Ibs 25.8Ibs. We stand behind our products. Your receive the wrong item.

The item "BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller" is in sale since Saturday, May 1, 2021. This item is in the category "Home & Garden\Home Improvement\Plumbing & Fixtures\Pumps & Water Filtration Systems\Pumps". The seller is "everydayideas" and is located in US. This item can be shipped to United States.


BACOENG Auto ON/OFF Stainless Steel Pressure Booster Pump with Smart Controller